Mobi Technologies 70061 Uživatelský manuál stáhnout pdf (Strana 15)

HOSE REELS

ACTERRA GROUP, INC.



800.289.7371



www.acterragroup.com

Spring Rewind Reels

To handle 1/4" through 1-1/2" I.D. hose.

Most Hannay spring reel models are

available with an air governor rewind assist,

which prevents the hose from winding

back onto the reel too quickly. Speed is

regulated by restricting air flow through an

air governor attached to the rewind mechanism. The result

is smooth, controlled rewind speed each and every time.

Unlike other speed control mechanisms designed for spring

rewind reels, there are 3 major advantages to the Hannay

design:

Highly scalable – The air speed control

governor can be scaled up to regulate speed

on even the most powerful spring reels we

offer. Other designs can only work on light-

duty springs.

Operates in all climates – Because the AG Series uses

air flow to control speed (not hydraulic fluid, which can

change viscosity depending on temperature), the reel’s

rewind speed is controlled and unaffected, even by cold

weather.

Fully adjustable – The end-user can turn the

air restrictor clockwise or counterclockwise

until the optimal rewind speed is found for the

application.

• Narrow frame and compact mounting base.

• Non-sparking ratchet assembly.

• Declutching arbor to prevent damage from reverse winding.

• Standard inlet: 90° balanced pressure swivel joint

• Temperatures from -60°F to +250°F (-51°C to

+121°C), optional temps to +400°F (+204°C) –

must specify.

• 4-way roller assembly.

• Constant tension is available – consult factory.

Mfg#

Hose Size

Application

Series N400

¼’ or 3/” ID

Gas Welding

Series N700 ¼” – ½” ID

Lubrication • Air/Water • Assembly Operations •

Washdown • Air Tools • General Industrial

Applications

Series 700 ¼” – ½” ID

Lubrication • Air/Water • Assembly Operations •

Washdown • Air Tools • General Industrial

Applications

Series N800 ¾” – 1” ID

Fuel Dispensing* • Waste Oil Evacuation •

Air/Water

Series 800 ¾” – 1” ID

Fuel Dispensing* • Waste Oil Evacuation •

Air/Water

Series 900 1¼” – 1½” ID

Bulk Transfer • Fuel Dispensing* •

Suction/Discharge*

*Consult Factory

Manual or Power Rewind Reels

Since 1933, the fuel-lube and trucking

industries have trusted Hannay Reels to

dispense gas, water, air, and nitrogen.

That’s because our reels are not

retrofitted to the job, but created

specifically for fuel delivery applications.

Safer operation – Bond/ground fuel trucks; non-sparking

ratchet assembly; explosion-proof motors

Custom design – Every reel is built to

the unique vehicle specs, guaranteeing

a perfect fit; suspended/IV reels allow

access on either side of the vehicle

Long service life – Quality, heavy-duty

design and construction result in reels that often outlast the

vehicles they’re used onLightweight, compact reels

designed for long lengths of hose in manual and power

rewind.

• Direct crank rewind is permanently

attached.

• Chain and sprocket drive powered by

electric, hydraulic or compressed air

motor.

• Manual reels include cam-lock drag

brake, spring actuated pin lock.

• Optional rollers: Specify roller position when ordering.

• Standard pressures to 2000 psi (138 bar), available up

to 4000 psi (276 bar) – must specify.

• Temperatures from -40°F to +250°F (-40°C to +121°C).

Mfg#

Hose Size

Application

Series 4000 ¾” or 1” ID

Fuel Dispensing* • Water Supply •

Fire Protection • Chemical Transfer

Series 600 ½” – 1” ID

Fuel Dispensing* • Spray Operations •

Fire Protection • Water Blasting

Series 7500 1” – 1 ½” ID

Fuel Dispensing* • Bulk Transfer •

Suction/Discharge*

Series 8000 1½” or 2” ID

Fuel Dispensing • Bulk Transfer • Chemical Transfer

• General Dispensing

Series 9000 2” – 3” ID

Fuel Dispensing • Bulk Transfer • Chemical Transfer

• General Dispensing

*Consult Factory

Single Wrap Power Rewind Reels

To handle single 1-1/2" I.D. through 3" I.D.

hose – great for aviation.

• Effortless and fast rewinding, wrapping,

guiding of hose.

• Chain and sprocket drive powered by

electric, hydraulic, or compressed air motor.

• Auxiliary crank rewind, optional.

• 12 volt rewind, comet brake, reduction unit standard.

• Air brake optional.

• Inlet, hub assembly is aluminum and/or stainless steel for

jet fuel.

• Consult factory for other pressures & temps.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

Komentáře k této Příručce

Žádné komentáře

Mobi Technologies 70061 Uživatelský manuál Strana 15

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Mobi Technologies 70061